Designers & Manufacturers of High Temperature Furnaces, Kilns, Ovens, Driers, Burners, High Velocity Burners, Combustion Systems, Recuperators, Hot air Generators, Electrical Control system, Solar Products and Energy Audits.
Single Fuel Burner
Range of Parameters
Fuel : FO / LDO / HSD / SKO / LPG / CNG / PG / BG / COG / BFG
Output : 1, 50, 000 KCAL/HR, 3, 50, 000 KCAL/HR to Any Capacity
Ignition : Auto Ignition
Temperature Control : Auto
Air Fuel Ratio : Auto
Product : Aa per Customer Req.
Tunnel KilnINR0INR0In Tunnel Kiln the car is movable and the kiln is in tunnel type. The range of kiln temperature is between 800ºC to 1800 ºC. All type of fuels like furnace oil, HSD, LDO, kerosene, LPG, natural gas, producer gas, Bio gas can be used for firing.
Tunnel Kiln is side draft kiln and the kiln pressure can be maintained accurately. This type of kiln is used for continuous type production.
Transfer car for car movement is provided at entry and exit side. The door raising is done by hydraulic system or gear motor system or pneumatic system. Car pushing system is done by hydraulic system with two door mechanism.
This type of kiln is user-friendly and using SCADA all the temperature-time graph and all control parameters can be monitored. Using PLC, the kiln is fully automated for the easy usage of the customers.True1470472529
Tunnel DrierINR0INR0In this type of Tunnel Drier, the car is movable and the Drier is stationary. The range of Drier temperature is between 50ºC to 150ºC for removing the moisture in the product. All type of fuels like furnace oil, HSD, LDO, kerosene, LPG, natural gas, producer gas, Bio gas can be used for firing.
TEMPERATURE : 50 to 150°C
CAPACITY : 2 to 50 Ton/day
LENGTH : 30 to 150 m
FUEL : FO/HSD/LDO/KEROSENE/LPG/NATURAL GAS/PRODUCER GAS/BIO GAS
CONTROL : AUTO/SEMI-AUTO/MANUAL
PRODUCT : FLOW CONTROL PRODUCT, SILICA, FIRE BRICKS, CLAY BRICKS, AS PER CUSTOMER RequirementTrue1470473152
Clay ProductsINR0INR0With more than 20 years of experience in the field of Kiln, Drier., Issojet provides kilns & driers to fire clay products.
Our product range includes
Tunnel kiln / Shuttle Kiln
Tunnel drier / Shuttle drier for
1.) Clay Doll Industry
2.) Clay Lamp Industry
3.) Clay Brick IndustryTrue1470472406
Combustion ControlsINR0INR0Close control of system temperature throughout the firing cycle assures close control of product quality. Product can be heated as fast as heat can be absorbed.
The firing flexibility of the combustion system enables the user to have complete control of all firing variables (firing rate, cooling rate, circulation, fuel/air ratio, excess air & kiln pressure) to assure maximum firing efficiency.
The following are the COMBUSTION FEEDING, REDUCTION & BOOSTING SYSTEM we supply
1.) Fuel Feeding System for Oil , Gas, Pulverized coal & Petcoke
2.) Fuel Reduction Manifold for Oil & Gas.
3.) Fuel Boosting system for Pulverized Coal & Petcoke
The following are the VALVES & CONTROLS we supply (Manual Valve and Actuated Valve)
1.) Butterfly Valves – Any size upto operating temperature upto 650 deg C
2.) Slide Gates – Any size upto operating temperature upto 650 deg C
3.) Port Valve – Any size upto operating temeprature upto 500 deg C
The following are the BURNER IGNITION ACCESSORIES we supply
1.) Spark plug
2.) Ignition Transformer
3.) Flame Sensors
4.) Pilot Mixer
5.) Pilot Burner
6.) Solenoid Valves
The following are the AUTOMATIC CONTROLS we supply
1.) Temperature Control
2.) Pressure Control
3.) Humidity Control
4.) Air-Fuel ratio Control
5) Over Temperature Control
6.) Flow ControlTrue1470473315
Recuperator, Heat ExchangerINR0INR0We custom design the recuperator as per customer requirement. Recuperators manufactured by us will have good effectiveness. We make Shell & Tube of 2-pass, 3-pass, 4-pass heat exchangers.
In a recuperator both mediums are separated by a wall through which heat is transferred directly. The only fundamental loss hereby is the heat conduction through the wall in the flow direction. However, this can be reduced by using insulating materials having low heat conductivity.True1470473409
Shuttle OvenINR0INR0In this type of Oven, the car is movable and the Oven is stationary. The range of Oven temperature is between 150ºC to 700 ºC. All type of fuels like furnace oil, diesel, kerosene, LPG, natural gas, producer gas can be used for firing. This type of oven is used for batch type production.
For car movement gear motor–winch arrangement is used. Transfer car for car movement is provided, if required. The door closing is done by hydraulic system or pneumatic system. Even manual door movement and sealing arrangement can be done according to the customer requirement.
This type of kiln is user-friendly and using SCADA all the temperature-time graph and all control parameters can be monitored. Using PLC, the kiln is fully automated for the easy usage of the customers.True1470472805